Research Field
Materials Characterization
In-situ and operando cells compatible with XRD, Raman and other analytical instruments.
Electrode Materials
1 product →In-Situ Cells
3 products →
In-Situ Raman Spectroelectrochemistry Cell (Basic) — 37 mm Quartz Window, PEEK Body
PEEK spectroelectrochemistry cell with a 37 mm quartz window; working electrode sits directly under the window (<6 mm) for in-situ Raman and optical observation. Ag/AgCl reference and Pt counter electrode included.
1 variantView →
In-Situ Raman Two-Electrode Battery Test Cell — Sapphire Window, Spring-Loaded Titanium
Two-electrode titanium cell with sapphire window for operando Raman of electrode interfaces. Spring-loaded, sample-to-window distance <2 mm, 20 mm electrodes. Assemble in glovebox, operate in open air.
1 variantView →
XRD In-Situ Cell for Battery Characterization | Kapton Window
In-situ XRD electrochemical cell with Kapton window for real-time battery material analysis. Single and double-window configurations. Compatible with standard diffractometers.
2 variantsView →
Testing Equipment
8 products →
In-Situ Lithium Dendrite Observation Cell
Two-electrode simulated coin cell with a side sapphire window (>95% transmission) for real-time optical microscopy of lithium dendrite growth at the electrode cross-section.
2 variantsView →
Membrane Conductivity Test Cell | Two-Electrode, PEEK Body, Platinum Plate Electrodes
Two-electrode PEEK cell with platinum plate electrodes for ex-situ conductivity and resistance measurement of ion-exchange membranes (PEM/AEM). Clamps directly to any potentiostat or EIS analyzer.
2 variantsView →
Single-Point Pressing Solid-State Battery Test Mold
Single-point axial pressing solid-state battery mold with 5 T stack force, φ10 mm cavity, PEEK-ceramic composite, Standard and With-Sensor variants on one page
2 variantsView →
Solid-State Battery Test Mold with Locking Ring | Compact
Locking-ring split-cell mold with quick pressure release, optimized for frequent sample changes and glovebox operation in all-solid-state battery research.
1 variantView →
Swagelok-Type Two-Electrode Battery Test Cell | PEEK Body, Glassy Carbon Electrodes
Swagelok-type simulated coin cell fixture. PEEK body, glassy carbon (GC-Φ3) current collectors, two working samples sandwiched around a separator. Fits 10/12/16 mm electrodes.
1 variantView →
Three-Point Pressing Solid-State Battery Test Mold
Three-point pressing + PEEK-ceramic composite, dual-seal split-cell design; choose the mechanical or sensor-equipped variant on the same page for the full solid-state workflow from powder to conductivity testing.
2 variantsView →
Two-Electrode Battery Test Cell | Titanium Body, Spring-Loaded, 20mm Electrode
Spring-loaded two-electrode test cell with high-purity titanium body, PEEK insulation and gold-plated terminals. Assemble in a glovebox, cycle in open air. Fits 20 mm electrodes.
1 variantView →
Visible Swagelok-Type Three-Electrode Battery Test Cell | Optical Windows, PEEK Body
Swagelok-type simulated coin cell with a single-side sapphire window for real-time observation and a reference-electrode port for three-electrode testing. PEEK body, GC-Φ3 collectors, 10/12/16 mm samples.
1 variantView →

